Difference between revisions of "DomU Install with Virt-Install"
(Clean up the page, add stuff about installing virt-install, and doing text-mode installation with virt-install)
|Line 84:||Line 84:|
Revision as of 13:29, 26 March 2012
Virt-install is not part of Xen, but it's developed by Redhat and included in Fedora, and it can be used to install new Xen domUs (along with KVM based guests).
virt-install has two modes of installation:
- graphical, by using VNC, where you get the normal install experience. This is usually used if you're installing on the same system that you're using, but for whatever reason can't use virt-manager.
- text-based, by using the emulated serial port, where you get the console-mode installation experience. This is normally done for remote systems that you connect to via SSH.
Note: This example is installing a Fedora 13 domU onto a Fedora 13 dom0. However, the same technique should work for installing Fedora/RHEL/CentOS domUs on dom0s with virt-install.
- 1 Getting virt-install
- 2 Preparing to install/create a new domU
- 3 Using virt-install to do a graphical installation
- 4 Using virt-install to do a test-based installation
- 5 A few points about disk partitioning in the domU
This portion is fairly simple - just run
yum install libvirt python-virtinst
and let Yum sort out the dependencies.
Preparing to install/create a new domU
First we'll create a new logical volume to be used as the virtual disk for the domU:
[root@f13 ~]# lvcreate -nf13 -L40G /dev/vg_f13 Logical volume "f13" created
This example created a 40GB logical volume named "f13" on the volume group "vg_f13". As such, the install location that we're using is /dev/vg_f13/f13.
Using virt-install to do a graphical installation
There are 2 possible ways of doing a graphical install:
- Using virt-viewer on the dom0 to display the graphical console - Use this is you're working at the dom0 itself.
- Using a VNC viewer to connect to the graphical console on the dom0 - Use this if you're not working at the dom0, but are connecting to it remotely
Doing a local graphical virt-install
Start the domU installation with:
virt-install -n f13 -r 768 --vcpus=1 -f /dev/vg_f13/f13 --graphics -p -l "http://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/13/Fedora/i386/os"
For more information on what each parameter does, refer to the virt-install man page. A brief summary:
- -n <name> will set the name of the domU that appears in the dom0 to name. (It doesn't set the hostname inside the domU.)
- -r <number> refers to the amount of RAM (in MB) to allocate to the new domU
- -f <path> refers to the location of the image file that virt-install will use. Can be a disk image (e.g. var/xen/images/domU.img), a logical volume (e.g. /dev/volume_group/logical_volume) or a physical disk (e.g. /dev/sdb).
- -p tells virt-install to use para-virtualization
- -l <path> is the location of the install files. It should be a network accessible path, not a folder on the local disk - the installation process in the domU will use this location to download the rpm files.
After you run virt-install, you'll see something like this:
[root@f13 ~]# virt-install -n f13 -r 768 --vcpus=1 -f /dev/vg_f13/f13 --graphics -p -l "http://ftp.funet.fi/pub/mirrors/fedora.redhat.com/pub/fedora/linux/releases/13/Fedora/i386/os" Starting install... Retrieving file .treeinfo... | 2.8 kB 00:00 ... Retrieving file vmlinuz-PAE... | 6.7 MB 00:02 ... Retrieving file initrd-PAE.img... | 74 MB 00:01 ... Creating domain... | 0 B 00:01
After the installer files have been downloaded the graphical phase of the Fedora 13 installer starts, and a window opens where you can see Fedora 13 installer booting up.
From there, you can install Fedora as usual.
Note: If you X11 forwarding set up, you can do this on your remote system. If you're using Windows, you can follow this guide to get X11 forwarding setup. On Linux and Mac, X11 forwarding should automatically work when you connect to the dom0 with
ssh -X dom0hostname
Using a remote graphical virt-install
This step only involves getting a VNC client on your system, followed by changing the virt-install command.
Specifically, you have to tell virt-install to setup the VNC server so you can connect to it. In particular, you'll need to specify the VNC options in the --graphics parameter, so it instead of just
it looks like
--graphics vnc,listen=0.0.0.0,port=5901 --noautoconsole
When you run virt-install, the initial output will look like the output mentioned above. However, after "creating domain", you'll be returned to the command prompt. Once that happens, you'll need to start the VNC client on your computer, and connect to hostname-of-dom0:1 to see the graphical console.
Note: If you don't specify the port number, the first open port above 5900 will be used. virt-install will tell you what address to connect to when you quit though.
Using virt-install to do a test-based installation
The virt-install command is mostly the same as the first one. The only difference is that instead of --graphics it's --graphics none, and virt-install takes over the same console that you just ran it from.
Once the installer files are downloaded, you'll be shown the text mode install screen:
For there, follow the install instructions for your respective domU distributions.
A few points about disk partitioning in the domU
- The "/boot" partition must be formatted as either "ext3" or "ext4" to avoid problems with pygrub loading the kernel from the disk. btrfs is not supported by pygrub as of Nov 9th, 2011.
- Some guides recommend that you format /boot as ext3. This was because pygrub in Xen 3 didn't support /boot formatted as ext4. The version of pygrub included with Xen 4.0.1 onwards properly supports ext4, so you can fairly safely go ahead and format /boot in the domU as ext4.