Xen 4.6 RC2 test instructions
What needs to be tested
- Making sure that Xen 4.6 compiles and installs properly on different software configurations; particularly on distros
- Making sure that Xen 4.6, along with appropriately up-to-date kernels, work on different hardware.
For more ideas about what to test, please see Testing Xen.
- xen: with a recent enough
git(>= 126.96.36.199) just pull from the proper tag (
4.6.0-rc2) from the main repo directly:
git clone -b 4.6.0-rc2 git://xenbits.xen.org/xen.git
With an older
git version (and/or if that does not work, e.g., complaining with a message like this:
Remote branch 4.6.0-rc2 not found in upstream origin, using HEAD instead), do the following:
git clone git://xenbits.xen.org/xen.git ; cd xen ; git checkout 4.6.0-rc2
- tarball: there is no tarball available for RC2 because tarball build is broken at the moment.
- Remove any old versions of Xen toolstack and userspace binaries (including
- Download and install the most recent Xen 4.6 RC, as described above. Make sure to check the
INSTALLfor changes in required development libraries and procedures. Some particular things to note:
Once you have Xen 4.6 RC installed check that you can install a guest etc and use it in the ways which you normally would, i.e. that your existing guest configurations, scripts etc still work.
Specific RC2 things
None at this time.
Specific ARM Test Instructions
Specific x86 Test Instructions
vNUMA for HVM
Xen 4.6 supports configuring virtual NUMA topology for HVM guests. It's not required for the host to have NUMA capability to use vNUMA. See xl manual for configuration syntax.
Migration v2 is supposed to work transparently to end users. There are two things that worth testing:
- Migrate from 4.6 to 4.6
- Migrate from 4.5 to 4.6
xl migrate command to test migration.
Reporting Bugs (& Issues)
- Use Freenode IRC channel #xentest to discuss questions interactively
- Report any bugs / missing functionality / unexpected results.
- Please put [TestDay] into the subject line
- Also make sure you specify the RC number you are using
- Make sure to follow the guidelines on Reporting Bugs against Xen.
We would love it if you could report successes by e-mailing
email@example.com, preferably including:
- Hardware: Please at least include the processor manufacturer (Intel/AMD). Other helpful information might include specific processor models, amount of memory, number of cores, and so on
- Software: If you're using a distro, the distro name and version would be the most helpful. Other helpful information might include the kernel that you're running, or other virtualization-related software you're using (e.g., libvirt, xen-tools, drbd, &c).
- Guest operating systems: If running a Linux version, please specify whether you ran it in PV or HVM mode.
- Functionality tested: High-level would include toolstacks, and major functionality (e.g., suspend/resume, migration, pass-through, stubdomains, &c)
The following template might be helpful: should you use Xen 4.6.0-RC2 for testing, please make sure you state that information!
Subject: [TESTDAY] Test report * Hardware: * Software: * Guest operating systems: * Functionality tested: * Comments:
Subject: [TESTDAY] Test report * Hardware: Dell 390's (Intel, dual-core) x15 HP (AMD, quad-core) x5 * Software: Ubuntu 10.10,11.10 Fedora 17 * Guest operating systems: Windows 8 Ubuntu 12.10,11.10 (HVM) Fedora 17 (PV) * Functionality tested: xl suspend/resume pygrub * Comments: Window 8 booting seemed a little slower than normal. Other than that, great work!