Xen ARM with Virtualization Extensions/OdroidXU

From Xen
Revision as of 20:01, 6 January 2015 by Suriyan (talk | contribs) (Resources)
Icon todo.png To Do:

Add page

Preparing the board

The bootloader provided with the OdroidXU does not let Xen boot in hypervisor mode. In the Odroid forums for the XU, one is likely to see many U-Boot blobs (bl1/bl2/tzsw/u-boot) which could possibly be used to let Xen boot in hypervisor mode. To avoid multiple sources, currently a single source is provided which can be accessed from https://github.com/suriyanr/linux-xen/tree/odroid-3.13.y/sd_fuse

The sd_fusing.sh script found therein can be used to fuse the SD card or eMMC card with the required BL1/BL2/TZSW and U-Boot.

 sd_fusing.sh /dev/mmcblk0

This will let XEN boot in hypervisor mode as well as set CNTFRQ through the trustzone. This is required for domUs to get the correct timer frequency. (dom0's optionally can pick it up from the device tree)

Building XEN

Follow Build Xen on ARM to build XEN. For more verbose debug messages from XEN, it is worthwhile to compile XEN as below:

 make dist-xen XEN_TARGET_ARCH=arm32 debug=y CONFIG_EARLY_PRINTK=exynos5250

For the moment, xen doesn't build uImage for U-Boot. You can create the image with:

 mkimage -A arm -T kernel -a 0x80200000 -e 0x80200000 -C none -d "$xen_src/xen/xen" xen4.5-uImage

where $xen_src is the root directory of your xen git.

Building the device tree for Xen and the Linux Dom0

We will build Linux for dom0 to have a device tree to provide to Xen.

You can get a tree from [1] which contains a working configuration for the Odroid XU.

 git clone -b odroid-3.13.y https://github.com/suriyanr/linux-xen.git --depth=1
 cd linux-xen
 make ARCH=arm CROSS_COMPILE=$CROSS_COMPILE odroidxu_xen_defconfig
 # Note that CROSS_COMPILE has to be set appropriately or can be left unset if building natively.

The device tree used by the OdroidXU is located in arch/arm/boot/dts/exynos5410-odroidxu.dtb

Booting from SD/eMMC card

Start with a distribution that you like, say xubuntu 14.04lts from http://odroid.in/ubuntu_14.04lts/ubuntu-14.04lts-xubuntu-odroid-xu-20140714.img.xz, or ArchLinuxArm if you prefer from http://archlinuxarm.org/platforms/armv7/samsung/odroid-xu.

Once you have imaged the SD card or eMMC card with your preferred distribution, please overwrite the BL1/BL2/TZSW/U-Boot as mentioned in Xen_ARM_with_Virtualization_Extensions/OdroidXU#Preparing_the_board

Both the distributions mentioned above have a VFAT partition as the first partition. We shall use this partition to populate the XEN specific images - zen4.5-uImage, zImage, exynos5410-odroidxu.dtb - under a directory called xen. This is so we avoid overwriting the files that come with the default distribution in case we want to revert back the XEN changes.

 suriyan@Stealth:/media/suriyan/BOOT$ ls -l xen
  -rw-r--r-- 1 suriyan suriyan   40467 Dec  8 14:04 exynos5410-odroidxu.dtb
  -rw-r--r-- 1 suriyan suriyan  689052 Dec  8 15:15 xen4.5-uImage
  -rw-r--r-- 1 suriyan suriyan 4709392 Dec  8 14:04 zImage

Note, that the file sizes that you have might be different. The purpose here is to show the directory and the names of the files therein.

Rename the original boot.ini file in the VFAT partition to boot.ini.org. Copy the boot.ini found in https://github.com/suriyanr/linux-xen/blob/odroid-3.13.y/sd_fuse/boot.ini in its place.

Now we can plug the SD/eMMC card to the OdroidXU and boot it up.

Building a Linux DomU Kernel


  • Information about the OdroidXU board: [2]
  • Odroid XU forum: [3]