Xen ARM with Virtualization Extensions/Salvator-X

From Xen
Revision as of 15:07, 21 November 2016 by Deadwitcher (talk | contribs)

The Salvator-X board based on Renesas R-Car H3 SoC is now supported in Xen upstream.

Only minimal configuration - for core-image-minimal are now supported & tested!


Follow setup are based & tested on official Renesas Yocto 2.12.0 release (https://github.com/renesas-rcar/meta-renesas/releases/tag/Renesas-Yocto-v2.12.0)

  • Checkout on follow commits:
   poky - 40376446904ae3529be41737fed9a0b650ed167d
   meta-linaro - 9b1fd178309544dff1f7453e796a9437125bc0d9
   meta-openembedded - 8ab04afbffb4bc5184cfe0655049de6f44269990
   meta-renesas - 522efd09043aa8af1eec01af2b9e025df424d9a5
  • Clone some additional yocto layers are required:
   meta-selinux - 4c75d9cbcf1d75043c7c5ab315aa383d9b227510
   meta-virtualizaion - 042425c1d98bdd7e44a62789bd03b375045266f5
  • Clone meta-platform-xen repository in the same directory
   git clone https://github.com/qbeeukraine/meta-platform-xen.git -b 2.12/minimal
  • Initialize yocto build environment
   source poky/oe-init-build-env
  • Copy local.conf & bblayers.conf from supplied xen layer

cp meta-platform-xen/meta-rcar-gen3-xen/doc/*.conf ./conf/

Check u-boot environment variables

Set follow configuration in u-boot command prompt.

bootargs=dom0_mem=512M console=dtuart dtuart=serial0 dom0_max_vcpus=1 bootscrub=0 flask_enforcing=1
bootcmd=tftp 0x78080000 xen-salvator-x-xen.uImage; tftp 0x738000000 Image-r8a7795-salvator-x-dom0.dtb; tftp 0x7a000000 Image; tftp 0x7c000000 xenpolicy-salvator-x-xen; bootm 0x78080000 - 0x738000000

Documentation Type: Manual